FE 0212 IR 00
Drawing
Hydraulic symbol
Pressure drop
1.
www.eltfluid.com
For general conditions and terms of use see page S.035.
This document is Elt Fluid property and therefore data or
technical specification can not be reproduced.
Eltfluid also reserves the right to make modifications in
any case the above data.
Oil viscosity: 32cSt/200 Fluid temperature: 40° C
0
3
6
9
12
15
0 10 20 30 40 50 60 70
0
50
100
150
200
812160
Pressure bar/psi
Flow lpm/gpm
Flow from 2 to 1
TECHNICAL DATA
HYDRAULIC
Max. working pressure: 350 bar (5.075 psi)
Flow rate: min 2 l/min (0,5 gpm)
max 70 l/min (18,7 gpm)
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Leakage: 0,25 cc/min (5 drops/min)
P max. 350 bar (5.075 psi)
Standard seals: O-ring NBR Back up ring PTFE
Cavity: SCN1020
Installation torque: 40 N/m
Coil nut torque: 2 N/m
Max contamination level: NAS 8 ISO 4406 19/17/14
Fluid temperature range: From -20 to +80 C°
Fatigue cycle life: 1.000.000 cycle at 350 bar
Seal kit std.: K102N00
ELECTRIC
Type of voltage: DC
Insulation index: H
Nominal voltage: +/- 10 %
Power at 20 C°: 22 W
ED*: 100% with ambient temperature
range -20 C° +40 C°
Coil code:
(see page 9.012)
S130-22P
*Note: For temperature or special conditions contact our sales department.
E10N-20
Description
Electric cartridge valve on/off designed to hold the load or block flow at high
pressure application, where low leakage is requested.
Operation mode
COIL NOT POWERED: the valve in closed position blocks the flow from 2 to 1.
COIL POWERED: the valve allows flow from 2 to 1.
GENERAL DATA
Weight without coil: 0,19 Kg (0,42 lbs).
Ambient temperature range: -30 C° a 60 C° with standard seals (NBR).
Max. proof pressure: 420 bar (6.090 psi).
Flow Max: 70 l/min (18,7 gpm).
Cartridge materials: high strength steel, internal parts hardened and grinding.
1
2
Solenoid valve 2 ways 2 positions,
poppet pilot operated, normally closed.
Electric valve
050.1